Global Machinery Company BJ110M User Manual download pdf (Page 13)

3. Cut the slots into the workpiece that will become the

vertical board.

4. Cut the slots into the workpiece that will become the

horizontal board

5. Once all the slots are cut insert a biscuit into each joint

and dry assemble the workpieces to ensure everything

lines up and fits.

6. Insert a water-based glue into the slots.

7. Place the biscuits in position and clamp the joint until the

biscuits swell and the glue sets.

Maintenance

All the bearings are sealed ball bearings, lubricated for life,

and require no maintenance.

Regularly check that all the fixing screws are tight.

They may vibrate loose over time.

Power cord maintenance

If the supply cord needs replacing, the task must be carried

out by the manufacturer, the manufacturer’s agent, or an

authorised service centre in order to avoid a safety hazard.

Cleaning

1. Keep the tool’s air vents unclogged and clean at all

times.

2. Remove dust and dirt regularly. Cleaning is best done

with a rag. Wear safety goggles or an eye shield and

gloves whist cleaning.

3. Re-lubricate all moving parts at regular intervals.

4. Never use caustic agents to clean plastic parts.

CAUTION. Do not use cleaning agents to clean the plastic

parts of the tool. A mild detergent on a damp cloth is

recommended. Water must never come into contact with

the tool.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Global Machinery Company BJ110M User Manual Page 13