Global Machinery Company LS236LS User Manual

INSTRUCTION MANUAL• Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris2300W 235mm (9-1/4”) Circular Sa

Note. Always use the correct blade depth setting. The correct blade depth setting for all cuts should not be more than 6mm below the material being cu

Adjusting the angle pointerWhen the angles are corrected on the saw, it is wise to adjust the pointer. 1. Set the angle as desired and loosen the scr

Note. Since blade thickness varies, always make a trial cut in scrap material along the guideline to determine how much, if any, the guideline must be

6. Align the beam with the line on the work piece.7. Always let the blade reach full speed (approximately 2 seconds) before you begin to cut into th

14Maintenance1. Keep the tool’s air vents unclogged and clean at all times.2. Remove dust and dirt regularly. Cleaning is best done with a soft rag

Carefully read the entire Instruction Manual before using this product.Before returning this product for a Warranty Claim or any other reason Please C

ContentsFull 2 Years Commercial and Trade Use WarrantyWhilst every effort is made to ensure your complete satisfaction with this tool, occasionally, d

WARNING.1. It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces.Description of symbolsThe rating p

General safety rulesWARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire

• Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measu

Additional safety rules for circular sawsDANGERa) Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle, or motor

e) Do not use dull or damaged blades. Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding and kickback.

Know your product1. Laser light assembly2. Laser aperture3. Trigger switch 4. Laser light on/off button5. Motor housing6. Main handle7. Front handle8.

AccessoriesThe GMC LS236LS Circular Saw is supplied with the following accessories as standard:1. Blade wrench2. Blade (fitted)3. Parallel fence guide