Global Machinery Company BJ110M User Manual download pdf (Page 9)

Adjusting the secondary handle

1. Using the allen key loosen the hex screw on each side of

the handle (fig B).

2. Position the handle to the desired position (fig C).

3. Tighten the 2 hex screws to secure the handle in position.

Adjusting the bevel angle

The adjustable tilt feature allows slots to be cut on a

bevelled edge.

1. Loosen the bevel adjustment lever by rotating it in an

anti-clockwise direction (fig D).

2. Move the main fence to the desired angle between

0° and 90° using the bevel scale and pointer as

a guide (fig E).

3. Tighten the bevel adjustment lever to secure the

fence in position.

Adjusting the cutting height

The height of the fence can be adjusted to let you make

biscuit slots at different depths down from the surface

of the workpiece.

1. Ensure that the main fence is set at 0°.

2. Attach the height adjustment fence to the main fence by

sliding it over the top of the main fence.

3. Position the height adjustment

fence to the desired height

using the scale on the main

fence as a guide (fig F & G).

4. Tighten the height adjustment

lever by rotating it in a

clockwise direction to secure

the fence in position (fig H).

Anti-slip rubber grips

Biscuit jointers tend to pull to the

right when making a cut. The

anti-slip rubber grips have been

provided to reduce this effect

and help keep the biscuit joiner

steady on the workpiece (fig I).

Changing the blade

CAUTION. Always ensure that the biscuit joiner is switched

off and unplugged from the

power supply before making any

adjustments.

1. Loosen and remove the 4

screws on the base of the

biscuit joiner.

2. Remove the base plate to

reveal the blade (fig J).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Global Machinery Company BJ110M User Manual Page 9

Comments to this Manuals

Related products and manuals for Power universal cutters Global Machinery Company BJ110M