Global Machinery Company BJ110M User Manual download pdf (Page 10)

3. Whilst holding the spindle lock

button rotate the blade by

hand until the blade locks in

place (fig K).

4. Whilst depressing the spindle

lock button, turn the blade

flange anti-clockwise using the

pin wrench provided (fig L).

5. Remove the outer blade

flange (fig M).

6. Remove the blade from the

inner flange.

7. Clean the blade flanges

thoroughly before mounting

the new blade. Wipe a drop

of oil onto the inner and outer

flange where they will touch

the blade.

8. Mount the new blade onto the

spindle and against the inner

flange.

9. Replace the outer flange and

tighten.

WARNING. The direction in

which the blade rotates has to be

the same as the direction of

the arrow marked on the housing.

10. Ensure that the spindle lock button is released.

IMPORTANT. After replacing the saw blade, make sure that

the saw blade runs freely by turning the blade by hand.

11. Replace the base plate and secure with the 4 screws.

12. Plug the machine into a power socket and run the

biscuit joiner under no load to check that it runs

smoothly before using it to cut any material.

Turning on and off

1. Connect the plug to the power point.

2. Start the tool by squeezing the on/off trigger switch (fig N).

3. Release the trigger to stop the tool.

4. If you press the lock-on button while the trigger

switch is depressed, the switch is kept in the

operating position (fig O).

5. The lock-on button allows the operator to keep the

biscuit joiner motor running without continuously

holding the switch. It is useful when operating the

tool for extended periods.

6. To release the lock-on button, press and release the

trigger switch

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Global Machinery Company BJ110M User Manual Page 10

Comments to this Manuals

Related products and manuals for Power universal cutters Global Machinery Company BJ110M